Five-Axis Machining

• 5-Axis Control Machining Using Side-Milling Cutter
• 5-Axis Control Machining with Top and Side Cutting Edges of Ball End Mill
• 5-Axis Control Rough Cutting of an Impeller with Efficiency and Accuracy
• Collision-Free Tool Path Generation Using 2-Dimensional C-Space for 5-Axis Control Machining
• Effective 5-Axis Control Machining Using Conicoid End Mill
• Tool Path Generation Using C-Space for 5-Axis Control Machining
• Strategic Tool Attitude Determination for Five-Axis Control Machining Based on Configuration Space
• NC Data Generation for Five-Axis Control Machining Using Curved Interpolation
• Rapid 5-Axis Control Tool Path Generation by Means of Linearly Interpolated C-Space
• Optimum Path Generation for 5-Axis Control Machining Considering Tool Attitude Change
• 5-Axis Control Machining of Complicated Shapes Based on Configuration Space
• Optimum Path Generation for 5-Axis Control Machining Considering Change in Tool Attitude for Whole of Machining Surface
• Development of Indexing Rough Cutting Method With Vertical Milling Using 5-axis Control Machine Tool
• Development of Tool Fabrication CAD/CAM System for Conicoid End Mill
• The Tool Path Generation by Using Configuration Space for Five-Axis Controlled Machining
  - Application to Rough Cutting by Using Square End Mill -
• Tool Path Generation for Five-Axis Controlled Machining with Consideration of Motion of Two Rotational Axes (Proceedings)
• Tool Path Generation for Five-Axis Controlled Machining with Consideration of Motion of Two Rotational Axes (Selected Paper)
• Tool Path Generation for Five-Axis Controlled Machining with Consideration of Structure Interference (Proceedings)
• Tool Path Generation for Five-Axis Controlled Machining with Consideration of Structural Interference (Selected Paper)
• Tool Path Generation for Five-axis Controlled Machining by Using Square and Radius End Mill with Consideration of Cutting Load Change (Proceedings)
• Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surface Using Barrel Tool : Control of Contact Point on Cutting Edge (Proceedings)
• Effect of Tilting Direction-Angle and Pick Feed Direction on Tilt Milling with Ball End Mill (Proceedings)
• Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surfaces Using a Barrel Tool Considering Continuity of Tool Postures
• Development of Tool Path Interpolation Method for Five-Axis Controlled Machining with Barrel Tools (Proceedings)
• Cutter Location Data Generation for All Types of Barrel Tool in Five-Axis Machining (Proceedings)
• C-Space-Based Toolpath Generation for Five-Axis Controlled Machining with Special Tools
• Tool Path Generation for Five-Axis Controlled Swarf Machining Considering Machining Error Caused by Tool Axis Change (Proceedings)

http://www.ims.mce.uec.ac.jp/